attttttt 发表于 2017-1-4 18:31:25

VStarcam C7837WIP RTSP流不可用

本帖最后由 attttttt 于 2017-1-4 18:32 编辑

固件版本如下:可能是vanelife定制版本
201.53.72.78 CH50.16.1.11
启动信息好像有错误全文:# dmesg
Linux version 3.0.8 (liuxiye@ubuntu) (gcc version 4.4.1 (Hisilicon_v100(gcc4.4-290+uclibc_0.9.32.1+eabi+linuxpthread)) ) #77 Tue Jun 23 10:02:32 CST 2015
CPU: ARM926EJ-S revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: hi3518
Memory policy: ECC disabled, Data cache writeback
AXI bus clock 200000000.
On node 0 totalpages: 9216
free_area_init_node: node 0, pgdat c03a314c, node_mem_map c03b2000
Normal zone: 72 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 9144 pages, LIFO batch:1
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc: 0
Built 1 zonelists in Zone order, mobility grouping on.Total pages: 9144
Kernel command line: mem=36M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=squashfs rw init=/sbin/init mtdparts=hi_sfc:1024k(boot),3072k(kernel),7168k(rootfs),5120k(system)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 36MB = 36MB total
Memory: 32704k/32704k available, 4160k reserved, 0K highmem
Virtual kernel memory layout:
    vector: 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap: 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA   : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc2800000 - 0xfe000000   ( 952 MB)
    lowmem: 0xc0000000 - 0xc2400000   (36 MB)
    modules : 0xbf000000 - 0xc0000000   (16 MB)
      .init : 0xc0008000 - 0xc001f000   (92 kB)
      .text : 0xc001f000 - 0xc038b000   (3504 kB)
      .data : 0xc038c000 - 0xc03a37c0   (94 kB)
       .bss : 0xc03a37e4 - 0xc03b1358   (55 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:32 nr_irqs:32 32
sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
Console: colour dummy device 80x30
Calibrating delay loop... 218.72 BogoMIPS (lpj=1093632)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Serial: AMBA PL011 UART driver
uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 5) is a PL011 rev2
console enabled
uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 5) is a PL011 rev2
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource timer1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.16)
msgmni has been set to 63
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
loop: module loaded
Spi id table Version 1.22
Hisilicon Spi Flash Controller V350 Device Driver, Version 1.10
Spi(cs1) ID: 0xC2 0x20 0x18 0xC2 0x20 0x18
SPI FLASH start_up_mode is 3 Bytes
Spi(cs1):
Block:64KB
Chip:16MB
Name:"MX25L128XX"
spi size: 16MB
chip num: 1
4 cmdlinepart partitions found on MTD device hi_sfc
Creating 4 MTD partitions on "hi_sfc":
0x000000000000-0x000000100000 : "boot"
0x000000100000-0x000000400000 : "kernel"
0x000000400000-0x000000b00000 : "rootfs"
0x000000b00000-0x000001000000 : "system"
Fixed MDIO Bus: probed
himii: probed
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
hiusb-ehci hiusb-ehci.0: HIUSB EHCI
hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
hiusb-ehci hiusb-ehci.0: irq 15, io mem 0x100b0000
hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
hiusb-ohci hiusb-ohci.0: HIUSB OHCI
hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2
hiusb-ohci hiusb-ohci.0: irq 16, io mem 0x100a0000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_wdm
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
registered taskstats version 1
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing init memory: 92K
mmc0: new high speed SDHC card at address 8360
mmcblk0: mmc0:8360 SU08G 7.40 GiB
mmcblk0: p4
usb 1-1: new high speed USB device number 2 using hiusb-ehci
udevd (367): /proc/367/oom_adj is deprecated, please use /proc/367/oom_score_adj instead.
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nowayout= 0, nodeamon= 0)
mt7601Usta: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
rtusb init rtusbSTA --->


=== pAd = c2aeb000, size = 860440 ===

RTMPAllocTxRxRingMemory, Status=0
RTMPAllocAdapterBlock, Status=0
RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x8
RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x4
RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x5
RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x6
RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x7
RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x9
NVM is EFUSE
Endpoint(8) is for In-band Command
Endpoint(4) is for WMM0 AC0
Endpoint(5) is for WMM0 AC1
Endpoint(6) is for WMM0 AC2
Endpoint(7) is for WMM0 AC3
Endpoint(9) is for WMM1 AC0
Endpoint(84) is for Data-In
Endpoint(85) is for Command Rsp
usbcore: registered new interface driver rtusbSTA
1. LDO_CTR0(6c) = a64799, PMU_OCLEVEL c
2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
FW Version:0.1.00 Build:7640
Build Time:201308222153____
ILM Length = 47000(bytes)
DLM Length = 0(bytes)
Loading FW....
#
RTMP_TimerListAdd: add timer obj c2b6b92c!
RTMP_TimerListAdd: add timer obj c2b6b944!
RTMP_TimerListAdd: add timer obj c2b6b95c!
RTMP_TimerListAdd: add timer obj c2b6b914!
RTMP_TimerListAdd: add timer obj c2b6b8cc!
RTMP_TimerListAdd: add timer obj c2b6b8e4!
RTMP_TimerListAdd: add timer obj c2b00764!
RTMP_TimerListAdd: add timer obj c2aed1e0!
RTMP_TimerListAdd: add timer obj c2aed1fc!
RTMP_TimerListAdd: add timer obj c2b007bc!
RTMP_TimerListAdd: add timer obj c2aefcf0!
RTMP_TimerListAdd: add timer obj c2aef3a0!
RTMP_TimerListAdd: add timer obj c2aefcd4!
RTMP_TimerListAdd: add timer obj c2aeff14!
RTMP_TimerListAdd: add timer obj c2aefd0c!
RTMP_TimerListAdd: add timer obj c2aefd28!
RTMP_TimerListAdd: add timer obj c2aefd44!
RTMP_TimerListAdd: add timer obj c2b00734!
RTMP_TimerListAdd: add timer obj c2b007a4!
RTMP_TimerListAdd: add timer obj c2aeff44!
RTMP_TimerListAdd: add timer obj c2aeff5c!
RTMP_TimerListAdd: add timer obj c2aeff74!
RTMP_TimerListAdd: add timer obj c2aeff8c!
cfg_mode=9
wmode_band_equal(): Band Equal!
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
1. Phy Mode = 14
2. Phy Mode = 14
NVM is Efuse and its size =1d
3. Phy Mode = 14
AntCfgInit: primary/secondary ant 0/1
---> InitFrequencyCalibration
InitFrequencyCalibrationMode:Unknow mode = 3
InitFrequencyCalibration: frequency offset in the EEPROM = 105(0x69)
- InitFrequencyCalibration
RTMPSetPhyMode: channel is out of range, use first channel=1
MCS Set = ff 00 00 00 01
== rt28xx_init, Status=0
0x1300 = 00064300
RTMPDrvOpen(1):Check if PDMA is idle!
RTMPDrvOpen(2):Check if PDMA is idle!
<font color="#ff0000">ERROR!!! MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS
AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OF</font>F
unlink cmd rsp urb
1. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
RTMP_TimerListAdd: add timer obj c2b6b92c!
RTMP_TimerListAdd: add timer obj c2b6b944!
RTMP_TimerListAdd: add timer obj c2b6b95c!
RTMP_TimerListAdd: add timer obj c2b6b914!
RTMP_TimerListAdd: add timer obj c2b6b8cc!
RTMP_TimerListAdd: add timer obj c2b6b8e4!
RTMP_TimerListAdd: add timer obj c2b00764!
RTMP_TimerListAdd: add timer obj c2aed1e0!
RTMP_TimerListAdd: add timer obj c2aed1fc!
RTMP_TimerListAdd: add timer obj c2b007bc!
RTMP_TimerListAdd: add timer obj c2aefcf0!
RTMP_TimerListAdd: add timer obj c2aef3a0!
RTSP端口未打开:



能不能用上RTSP?
差评 帖子大小有限制
file:///D:\Program Files (x86)\Tencent\QQ\Users\914524222\Image\C2C\M`QYDV5A}$C{_(ER7}K`RXS.png
file:///D:\Program Files (x86)\Tencent\QQ\Users\914524222\Image\C2C\M`QYDV5A}$C{_(ER7}K`RXS.png








Vstarcam_小杨 发表于 2017-5-2 11:35:54


您好!请发邮件到相应的研发支持邮箱,会有专业的研发同事给您回复。
andriod:dfc@vstarcam.com
ios: dfc@vstarcam.com
pc: wangsen@vstarcam.com
如果遇到疑问和困难可以联系我司售后服务qq:4006217868协助您进行处理,谢谢。
页: [1]
查看完整版本: VStarcam C7837WIP RTSP流不可用