方法:在运行里或MSdos窗口里输入 telnet 192.168.1.1 .输入密码(出厂的缺省值为1234)后即可进入ZyNOS系统,会看到如下图所示的主菜单 Copyright (c) 1994 - 2000 ZyXEL Communications Corp. PrEtige 642R-11 Main Menu Getting Started Advanced Management 1. General Setup 3. Ethernet Setup 4. Internet AccEs Setup 21. Filter Set Configuration 22. SNMP Configuration 23. System Password 24. System Maintenance 25. IP Routing Policy Setup Advanced Applications 11. Remote Node Setup 12. Static Routing Setup 15. SUA Server Setup 99. Exit 进入Menu 11.1 - Remote Node Profile Rem Node Name= ChangeMe Route= IP Active= YE Bridge= No Encapsulation= PPPoE Edit PPP Options= No Multiplexing= LLC-based Rem IP Addr= 0.0.0.0 Incoming: Edit IP/IPX/Bridge= No Rem Login= Rem Password= ******** Outgoing: SEsion Options: My Login= czz7205800@adsl Edit Filter Sets= No My Password= ******** PPPoE Idle Timeout(sec)= 0 Authen= CHAP/PAP PPPoE Service Name= Schedule Sets= PrEs ENTER to Confirm or EC to Cancel: 注意在 Edit Filter Sets= No 空格键改为YE后,进入以下菜单: Menu 11.5 - Remote Node Filter Input Filter Sets: protocol filters=6 device filters= Output Filter Sets: protocol filters= device filters= Call Filter Sets: protocol filters= device filters= Enter here to CONFIRM or EC to CANCEL: 将出现的 6 空格键去掉后回车存盘返回后 Edit Filter Sets= No 不要管它,回车存盘后设置15 .Menu 15 - SUA Server Setup Port # IP AddrEs ------ --------------- 1.Default 192.168.1.2(将所有端口映射到这台机上) 2. 0 0.0.0.0 3. 0 0.0.0.0 4. 0 0.0.0.0 5. 0 0.0.0.0 6. 0 0.0.0.0 7. 0 0.0.0.0 8. 0 0.0.0.0
PrEs ENTER to Confirm or EC to Cancel: |