VStarcam C7837WIP RTSP流不可用

attttttt

固件版本如下：可能是vanelife定制版本
201.53.72.78 CH50.16.1.11
启动信息好像有错误全文：

1. # dmesg
   
2. Linux version 3.0.8 (liuxiye@ubuntu) (gcc version 4.4.1 (Hisilicon_v100(gcc4.4-290+uclibc_0.9.32.1+eabi+linuxpthread)) ) #77 Tue Jun 23 10:02:32 CST 2015
   
3. CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
   
4. CPU: VIVT data cache, VIVT instruction cache
   
5. Machine: hi3518
   
6. Memory policy: ECC disabled, Data cache writeback
   
7. AXI bus clock 200000000.
   
8. On node 0 totalpages: 9216
   
9. free_area_init_node: node 0, pgdat c03a314c, node_mem_map c03b2000
   
10.   Normal zone: 72 pages used for memmap
    
11.   Normal zone: 0 pages reserved
    
12.   Normal zone: 9144 pages, LIFO batch:1
    
13. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
    
14. pcpu-alloc: [0] 0
    
15. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 9144
    
16. Kernel command line: mem=36M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=squashfs rw init=/sbin/init mtdparts=hi_sfc:1024k(boot),3072k(kernel),7168k(rootfs),5120k(system)
    
17. PID hash table entries: 256 (order: -2, 1024 bytes)
    
18. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
    
19. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
    
20. Memory: 36MB = 36MB total
    
21. Memory: 32704k/32704k available, 4160k reserved, 0K highmem
    
22. Virtual kernel memory layout:
    
23.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    
24.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    
25.     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    
26.     vmalloc : 0xc2800000 - 0xfe000000   ( 952 MB)
    
27.     lowmem  : 0xc0000000 - 0xc2400000   (  36 MB)
    
28.     modules : 0xbf000000 - 0xc0000000   (  16 MB)
    
29.       .init : 0xc0008000 - 0xc001f000   (  92 kB)
    
30.       .text : 0xc001f000 - 0xc038b000   (3504 kB)
    
31.       .data : 0xc038c000 - 0xc03a37c0   (  94 kB)
    
32.        .bss : 0xc03a37e4 - 0xc03b1358   (  55 kB)
    
33. SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    
34. NR_IRQS:32 nr_irqs:32 32
    
35. sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 42949ms
    
36. Console: colour dummy device 80x30
    
37. Calibrating delay loop... 218.72 BogoMIPS (lpj=1093632)
    
38. pid_max: default: 32768 minimum: 301
    
39. Mount-cache hash table entries: 512
    
40. CPU: Testing write buffer coherency: ok
    
41. NET: Registered protocol family 16
    
42. Serial: AMBA PL011 UART driver
    
43. uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 5) is a PL011 rev2
    
44. console [ttyAMA0] enabled
    
45. uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 5) is a PL011 rev2
    
46. bio: create slab <bio-0> at 0
    
47. usbcore: registered new interface driver usbfs
    
48. usbcore: registered new interface driver hub
    
49. usbcore: registered new device driver usb
    
50. cfg80211: Calling CRDA to update world regulatory domain
    
51. Switching to clocksource timer1
    
52. NET: Registered protocol family 2
    
53. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
    
54. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    
55. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
    
56. TCP: Hash tables configured (established 2048 bind 2048)
    
57. TCP reno registered
    
58. UDP hash table entries: 256 (order: 0, 4096 bytes)
    
59. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
    
60. NET: Registered protocol family 1
    
61. squashfs: version 4.0 (2009/01/31) Phillip Lougher
    
62. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
    
63. fuse init (API version 7.16)
    
64. msgmni has been set to 63
    
65. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    
66. io scheduler noop registered
    
67. io scheduler deadline registered (default)
    
68. io scheduler cfq registered
    
69. loop: module loaded
    
70. Spi id table Version 1.22
    
71. Hisilicon Spi Flash Controller V350 Device Driver, Version 1.10
    
72. Spi(cs1) ID: 0xC2 0x20 0x18 0xC2 0x20 0x18
    
73. SPI FLASH start_up_mode is 3 Bytes
    
74. Spi(cs1):
    
75. Block:64KB
    
76. Chip:16MB
    
77. Name:"MX25L128XX"
    
78. spi size: 16MB
    
79. chip num: 1
    
80. 4 cmdlinepart partitions found on MTD device hi_sfc
    
81. Creating 4 MTD partitions on "hi_sfc":
    
82. 0x000000000000-0x000000100000 : "boot"
    
83. 0x000000100000-0x000000400000 : "kernel"
    
84. 0x000000400000-0x000000b00000 : "rootfs"
    
85. 0x000000b00000-0x000001000000 : "system"
    
86. Fixed MDIO Bus: probed
    
87. himii: probed
    
88. usbmon: debugfs is not available
    
89. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    
90. hiusb-ehci hiusb-ehci.0: HIUSB EHCI
    
91. hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
    
92. hiusb-ehci hiusb-ehci.0: irq 15, io mem 0x100b0000
    
93. hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
    
94. hub 1-0:1.0: USB hub found
    
95. hub 1-0:1.0: 1 port detected
    
96. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    
97. hiusb-ohci hiusb-ohci.0: HIUSB OHCI
    
98. hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2
    
99. hiusb-ohci hiusb-ohci.0: irq 16, io mem 0x100a0000
    
100. hub 2-0:1.0: USB hub found
     
101. hub 2-0:1.0: 1 port detected
     
102. usbcore: registered new interface driver cdc_wdm
     
103. TCP cubic registered
     
104. Initializing XFRM netlink socket
     
105. NET: Registered protocol family 17
     
106. NET: Registered protocol family 15
     
107. lib80211: common routines for IEEE802.11 drivers
     
108. lib80211_crypt: registered algorithm 'NULL'
     
109. lib80211_crypt: registered algorithm 'WEP'
     
110. lib80211_crypt: registered algorithm 'CCMP'
     
111. lib80211_crypt: registered algorithm 'TKIP'
     
112. registered taskstats version 1
     
113. drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
     
114. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
     
115. Freeing init memory: 92K
     
116. mmc0: new high speed SDHC card at address 8360
     
117. mmcblk0: mmc0:8360 SU08G 7.40 GiB
     
118. mmcblk0: p4
     
119. usb 1-1: new high speed USB device number 2 using hiusb-ehci
     
120. udevd (367): /proc/367/oom_adj is deprecated, please use /proc/367/oom_score_adj instead.
     
121. Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nowayout= 0, nodeamon= 0)
     
122. mt7601Usta: module license 'unspecified' taints kernel.
     
123. Disabling lock debugging due to kernel taint
     
124. rtusb init rtusbSTA --->
     
125. 
     
126. 
     
127. === pAd = c2aeb000, size = 860440 ===
     
128. 
     
129. RTMPAllocTxRxRingMemory, Status=0
     
130. RTMPAllocAdapterBlock, Status=0
     
131. RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x8
     
132. RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x4
     
133. RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x5
     
134. RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x6
     
135. RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x7
     
136. RTMP_COM_IoctlHandle():pAd->BulkOutEpAddr=0x9
     
137. NVM is EFUSE
     
138. Endpoint(8) is for In-band Command
     
139. Endpoint(4) is for WMM0 AC0
     
140. Endpoint(5) is for WMM0 AC1
     
141. Endpoint(6) is for WMM0 AC2
     
142. Endpoint(7) is for WMM0 AC3
     
143. Endpoint(9) is for WMM1 AC0
     
144. Endpoint(84) is for Data-In
     
145. Endpoint(85) is for Command Rsp
     
146. usbcore: registered new interface driver rtusbSTA
     
147. 1. LDO_CTR0(6c) = a64799, PMU_OCLEVEL c
     
148. 2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
     
149. FW Version:0.1.00 Build:7640
     
150. Build Time:201308222153____
     
151. ILM Length = 47000(bytes)
     
152. DLM Length = 0(bytes)
     
153. Loading FW....
     
154. #
     
155. RTMP_TimerListAdd: add timer obj c2b6b92c!
     
156. RTMP_TimerListAdd: add timer obj c2b6b944!
     
157. RTMP_TimerListAdd: add timer obj c2b6b95c!
     
158. RTMP_TimerListAdd: add timer obj c2b6b914!
     
159. RTMP_TimerListAdd: add timer obj c2b6b8cc!
     
160. RTMP_TimerListAdd: add timer obj c2b6b8e4!
     
161. RTMP_TimerListAdd: add timer obj c2b00764!
     
162. RTMP_TimerListAdd: add timer obj c2aed1e0!
     
163. RTMP_TimerListAdd: add timer obj c2aed1fc!
     
164. RTMP_TimerListAdd: add timer obj c2b007bc!
     
165. RTMP_TimerListAdd: add timer obj c2aefcf0!
     
166. RTMP_TimerListAdd: add timer obj c2aef3a0!
     
167. RTMP_TimerListAdd: add timer obj c2aefcd4!
     
168. RTMP_TimerListAdd: add timer obj c2aeff14!
     
169. RTMP_TimerListAdd: add timer obj c2aefd0c!
     
170. RTMP_TimerListAdd: add timer obj c2aefd28!
     
171. RTMP_TimerListAdd: add timer obj c2aefd44!
     
172. RTMP_TimerListAdd: add timer obj c2b00734!
     
173. RTMP_TimerListAdd: add timer obj c2b007a4!
     
174. RTMP_TimerListAdd: add timer obj c2aeff44!
     
175. RTMP_TimerListAdd: add timer obj c2aeff5c!
     
176. RTMP_TimerListAdd: add timer obj c2aeff74!
     
177. RTMP_TimerListAdd: add timer obj c2aeff8c!
     
178. cfg_mode=9
     
179. wmode_band_equal(): Band Equal!
     
180. Key2Str is Invalid key length(0) or Type(0)
     
181. Key3Str is Invalid key length(0) or Type(0)
     
182. Key4Str is Invalid key length(0) or Type(0)
     
183. 1. Phy Mode = 14
     
184. 2. Phy Mode = 14
     
185. NVM is Efuse and its size =1d[1e0-1fc]
     
186. 3. Phy Mode = 14
     
187. AntCfgInit: primary/secondary ant 0/1
     
188. ---> InitFrequencyCalibration
     
189. InitFrequencyCalibrationMode:Unknow mode = 3
     
190. InitFrequencyCalibration: frequency offset in the EEPROM = 105(0x69)
     
191. - InitFrequencyCalibration
     
192. RTMPSetPhyMode: channel is out of range, use first channel=1
     
193. MCS Set = ff 00 00 00 01
     
194. == rt28xx_init, Status=0
     
195. 0x1300 = 00064300
     
196. RTMPDrvOpen(1):Check if PDMA is idle!
     
197. RTMPDrvOpen(2):Check if PDMA is idle!
     
198. <font color="#ff0000">ERROR!!! MlmeEnqueueForRecv: fRTMP_ADAPTER_HALT_IN_PROGRESS
     
199. AsicSendCmdToAndes: !fRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD && fRTMP_ADAPTER_IDLE_RADIO_OF</font>F
     
200. unlink cmd rsp urb
     
201. 1. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
     
202. 2. LDO_CTR0(6c) = a6478d, PMU_OCLEVEL 6
     
203. RTMP_TimerListAdd: add timer obj c2b6b92c!
     
204. RTMP_TimerListAdd: add timer obj c2b6b944!
     
205. RTMP_TimerListAdd: add timer obj c2b6b95c!
     
206. RTMP_TimerListAdd: add timer obj c2b6b914!
     
207. RTMP_TimerListAdd: add timer obj c2b6b8cc!
     
208. RTMP_TimerListAdd: add timer obj c2b6b8e4!
     
209. RTMP_TimerListAdd: add timer obj c2b00764!
     
210. RTMP_TimerListAdd: add timer obj c2aed1e0!
     
211. RTMP_TimerListAdd: add timer obj c2aed1fc!
     
212. RTMP_TimerListAdd: add timer obj c2b007bc!
     
213. RTMP_TimerListAdd: add timer obj c2aefcf0!
     
214. RTMP_TimerListAdd: add timer obj c2aef3a0!
     

复制代码

RTSP端口未打开：



能不能用上RTSP？
差评 帖子大小有限制
file:///D:\Program Files (x86)\Tencent\QQ\Users\914524222\Image\C2C\M`QYDV5A}$C{_(ER7}K`RXS.png
file:///D:\Program Files (x86)\Tencent\QQ\Users\914524222\Image\C2C\M`QYDV5A}$C{_(ER7}K`RXS.png

Vstarcam_小杨

您好！请发邮件到相应的研发支持邮箱，会有专业的研发同事给您回复。
andriod：dfc@vstarcam.com
ios: dfc@vstarcam.com
pc: wangsen@vstarcam.com
如果遇到疑问和困难可以联系我司售后服务qq：4006217868协助您进行处理，谢谢。